Version v0.13 of the documentation is no longer actively maintained. The site that you are currently viewing is an archived snapshot. For up-to-date documentation, see the latest version.

Advanced Networking

Static Addressing

Static addressing is comprised of specifying addresses, routes ( remember to add your default gateway ), and interface. Most likely you’ll also want to define the nameservers so you have properly functioning DNS.

machine:
  network:
    hostname: talos
    nameservers:
      - 10.0.0.1
    interfaces:
      - interface: eth0
        addresses:
          - 10.0.0.201/8
        mtu: 8765
        routes:
          - network: 0.0.0.0/0
            gateway: 10.0.0.1
      - interface: eth1
        ignore: true
  time:
    servers:
      - time.cloudflare.com

Additional Addresses for an Interface

In some environments you may need to set additional addresses on an interface. In the following example, we set two additional addresses on the loopback interface.

machine:
  network:
    interfaces:
      - interface: lo
        addresses:
          - 192.168.0.21/24
          - 10.2.2.2/24

Bonding

The following example shows how to create a bonded interface.

machine:
  network:
    interfaces:
      - interface: bond0
        dhcp: true
        bond:
          mode: 802.3ad
          lacpRate: fast
          xmitHashPolicy: layer3+4
          miimon: 100
          updelay: 200
          downdelay: 200
          interfaces:
            - eth0
            - eth1

VLANs

To setup vlans on a specific device use an array of VLANs to add. The master device may be configured without addressing by setting dhcp to false.

machine:
  network:
    interfaces:
      - interface: eth0
        dhcp: false
        vlans:
          - vlanId: 100
            addresses:
              - "192.168.2.10/28"
            routes:
              - network: 0.0.0.0/0
                gateway: 192.168.2.1
Last modified March 18, 2022: docs: overhaul all the docs (e3fda049f)