This document will walk you through installing a full Talos Cluster. You may wish to try the Quickstart first, to quickly create a local virtual cluster on your workstation.
Regardless of where you run Talos, there is a pattern to deploying it. In general you need to:
- acquire the installation image
- decide on the endpoint for Kubernetes
- optionally create a load balancer
- configure Talos
- bootstrap Kubernetes
talosctl is a CLI tool which interfaces with the Talos API in
an easy manner.
It also includes a number of useful options for creating and managing clusters.
You should install
talosctl before continuing:
curl -Lo /usr/local/bin/talosctl https://github.com/siderolabs/talos/releases/download/v1.1.1/talosctl-$(uname -s | tr "[:upper:]" "[:lower:]")-amd64 chmod +x /usr/local/bin/talosctl
darwin operating systems
talosctl is also available for the
arm64 processor architecture.
curl -Lo /usr/local/bin/talosctl https://github.com/siderolabs/talos/releases/download/v1.1.1/talosctl-$(uname -s | tr "[:upper:]" "[:lower:]")-arm64 chmod +x /usr/local/bin/talosctl
Acquire the installation image
The easiest way to install Talos is to use the ISO image.
The latest ISO image can be found on the Github Releases page:
- X86: https://github.com/siderolabs/talos/releases/download/v1.1.1/talos-amd64.iso
- ARM64: https://github.com/siderolabs/talos/releases/download/v1.1.1/talos-arm64.iso
When booted from the ISO, Talos will run in RAM, and it will not install itself until it is provided a configuration. Thus, it is safe to boot the ISO onto any machine.
For network booting and self-built media, you can use the published kernel and initramfs images:
Note that to use alternate booting, there are a number of required kernel parameters. Please see the kernel docs for more information.
Decide the Kubernetes Endpoint
In order to configure Kubernetes and bootstrap the cluster, Talos needs to know what the endpoint (DNS name or IP address) of the Kubernetes API Server will be.
The endpoint should be the fully-qualified HTTP(S) URL for the Kubernetes API Server, which (by default) runs on port 6443 using HTTPS.
Thus, the format of the endpoint may be something like:
Because the Kubernetes controlplane is meant to be highly available, we must also choose how to bind the API server endpoint to the servers themselves. There are three common ways to do this:
If you are using a cloud provider or have your own load-balancer available (such as HAProxy, nginx reverse proxy, or an F5 load-balancer), using a dedicated load balancer is a natural choice. Create an appropriate frontend matching the endpoint, and point the backends at each of the addresses of the Talos controlplane nodes.
Layer 2 Shared IP
Talos has integrated support for serving Kubernetes from a shared (sometimes called “virtual”) IP address. This method relies on OSI Layer 2 connectivity between controlplane Talos nodes.
In this case, we choose an IP address on the same subnet as the Talos controlplane nodes which is not otherwise assigned to any machine. For instance, if your controlplane node IPs are:
you could choose the ip
192.168.0.15 as your shared IP address.
Just make sure that
192.168.0.15 is not used by any other machine and that your DHCP
will not serve it to any other machine.
Once chosen, form the full HTTPS URL from this IP:
You are free to set a DNS record to this IP address to identify the Kubernetes API endpoint, but you will need to use the IP address itself, not the DNS name, to configure the shared IP (
machine.network.interfaces.vip.ip) in the Talos configuration.
For more information about using a shared IP, see the related Guide
If neither of the other methods work for you, you can use DNS records to provide a measure of redundancy. In this case, you would add multiple A or AAAA records (one for each controlpane node) to a DNS name.
For instance, you could add:
kube.cluster1.mydomain.com IN A 192.168.0.10 kube.cluster1.mydomain.com IN A 192.168.0.11 kube.cluster1.mydomain.com IN A 192.168.0.12
Then, your endpoint would be:
Decide how to access the Talos API
Since Talos is entirely API-driven, Talos comes with a number of mechanisms to make accessing the API easier.
Controlplane nodes can proxy requests for worker nodes. This means that you only need access to the controlplane nodes in order to access the rest of the network. This is useful for security (your worker nodes do not need to have public IPs or be otherwise connected to the Internet), and it also makes working with highly-variable clusters easier, since you only need to know the controlplane nodes in advance.
Even better, the
talosctl tool will automatically load balance requests and fail over
between all of your controlplane nodes, so long as it is informed of the
controlplane node IPs.
This means you need to tell your client (
talosctl) how to communicate with the controlplane nodes, which is done by defining the
In general, it is recommended that these point to the set of control plane
nodes, either directly or through a reverse proxy or load balancer, similarly to accessing the Kubernetes API.
The difference is that the Talos API listens on port
Whichever way you wish to access the Talos API, be sure to note the IP(s) or
hostname(s) so that you can configure your
NOTE: The Virtual IP method is not recommended when accessing the Talos API as it requires etcd to be bootstrapped and functional. This can make debugging any issues via the Talos API more difficult as issues with Talos configuration may result in etcd not achieving quorum, and therefore the Virtual IP not being available. In this case setting the endpoints to the IP or hostnames of the control plane nodes themselves is preferred.
When Talos boots without a configuration, such as when using the Talos ISO, it enters a limited maintenance mode and waits for a configuration to be provided.
Alternatively, the Talos installer can be booted with the
commandline argument set to an HTTP(s) URL from which it should receive its
In cases where a PXE server can be available, this is much more efficient than
manually configuring each node.
If you do use this method, just note that Talos does require a number of other
kernel commandline parameters.
See the required kernel parameters for more information.
In either case, we need to generate the configuration which is to be provided.
talosctl tool comes with a configuration generator for exactly
talosctl gen config "cluster-name" "cluster-endpoint"
cluster-name is an arbitrary name for the cluster which will be used
in your local client configuration as a label.
It does not affect anything in the cluster itself, but it should be unique in the configuration on your local workstation.
cluster-endpoint is where you insert the Kubernetes Endpoint you
selected from above.
This is the Kubernetes API URL, and it should be a complete URL, with
(The default port is
When you run this command, you will receive a number of files in your current directory:
.yaml files are what we call Machine Configs.
They are installed onto the Talos servers, and they provide their complete configuration,
describing everything from what disk Talos should be installed to, to what
sysctls to set, to what network settings it should have.
In the case of the
controlplane.yaml, it even describes how Talos should form its Kubernetes cluster.
talosconfig file (which is also YAML) is your local client configuration
Controlplane and Worker
The two types of Machine Configs correspond to the two roles of Talos nodes.
The Controlplane Machine Config describes the configuration of a Talos server on which the Kubernetes Controlplane should run. The Worker Machine Config describes everything else: workload servers.
The main difference between Controlplane Machine Config files and Worker Machine Config files is that the former contains information about how to form the Kubernetes cluster.
The generated files can be thought of as templates.
Individual machines may need specific settings (for instance, each may have a
different static IP address).
When different files are needed for machines of the same type, simply
copy the source template (
worker.yaml) and make whatever
modifications need to be done.
For instance, if you had three controlplane nodes and three worker nodes, you may do something like this:
for i in $(seq 0 2); do cp controlplane.yaml cp$i.yaml end for i in $(seq 0 2); do cp worker.yaml w$i.yaml end
In cases where there is no special configuration needed, you may use the same file for each machine of the same type.
After you have generated each machine’s Machine Config, you need to load them into the machines themselves. For that, you need to know their IP addresses.
If you have access to the console or console logs of the machines, you can read them to find the IP address(es). Talos will print them out during the boot process:
[ 4.605369] [talos] task loadConfig (1/1): this machine is reachable at: [ 4.607358] [talos] task loadConfig (1/1): 192.168.0.2 [ 4.608766] [talos] task loadConfig (1/1): server certificate fingerprint: [ 4.611106] [talos] task loadConfig (1/1): xA9a1t2dMxB0NJ0qH1pDzilWbA3+DK/DjVbFaJBYheE= [ 4.613822] [talos] task loadConfig (1/1): [ 4.614985] [talos] task loadConfig (1/1): upload configuration using talosctl: [ 4.616978] [talos] task loadConfig (1/1): talosctl apply-config --insecure --nodes 192.168.0.2 --file <config.yaml> [ 4.620168] [talos] task loadConfig (1/1): or apply configuration using talosctl interactive installer: [ 4.623046] [talos] task loadConfig (1/1): talosctl apply-config --insecure --nodes 192.168.0.2 --mode=interactive [ 4.626365] [talos] task loadConfig (1/1): optionally with node fingerprint check: [ 4.628692] [talos] task loadConfig (1/1): talosctl apply-config --insecure --nodes 192.168.0.2 --cert-fingerprint 'xA9a1t2dMxB0NJ0qH1pDzilWbA3+DK/DjVbFaJBYheE=' --file <config.yaml>
If you do not have console access, the IP address may also be discoverable from your DHCP server.
Once you have the IP address, you can then apply the correct configuration.
talosctl apply-config --insecure \ --nodes 192.168.0.2 \ --file cp0.yaml
The insecure flag is necessary at this point because the PKI infrastructure has not yet been made available to the node. Note that the connection will be encrypted, it is just unauthenticated.
If you have console access, though, you can extract the server certificate fingerprint and use it for an additional layer of validation:
talosctl apply-config --insecure \ --nodes 192.168.0.2 \ --cert-fingerprint xA9a1t2dMxB0NJ0qH1pDzilWbA3+DK/DjVbFaJBYheE= \ --file cp0.yaml
Using the fingerprint allows you to be sure you are sending the configuration to the right machine, but it is completely optional.
After the configuration is applied to a node, it will reboot.
You may repeat this process for each of the nodes in your cluster.
Configure your talosctl client
Now that the nodes are running Talos with its full PKI security suite, you need
to use that PKI to talk to the machines.
That means configuring your client, and that is what that
talosconfig file is for.
Endpoints are the communication endpoints to which the client directly talks. These can be load balancers, DNS hostnames, a list of IPs, etc. In general, it is recommended that these point to the set of control plane nodes, either directly or through a reverse proxy or load balancer.
Each endpoint will automatically proxy requests destined to another node through it, so it is not necessary to change the endpoint configuration just because you wish to talk to a different node within the cluster.
Endpoints do, however, need to be members of the same Talos cluster as the target node, because these proxied connections reply on certificate-based authentication.
We need to set the
endpoints in your
talosctl will automatically load balance and fail over among the endpoints,
so no external load balancer or DNS abstraction is required
(though you are free to use them).
As an example, if the IP addresses of our controlplane nodes are:
We would set those in the
talosctl --talosconfig=./talosconfig \ config endpoint 192.168.0.2 192.168.0.3 192.168.0.4
The node is the target node on which you wish to perform the API call.
Keep in mind, when specifying nodes, their IPs and/or hostnames are as seen by the endpoint servers, not as from the client. This is because all connections are proxied through the endpoints.
Some people also like to set a default set of nodes in the
This can be done in the same manner, replacing
If you do this, however, know that you could easily reboot the wrong machine
by forgetting to declare the right one explicitly.
Worse, if you set several nodes as defaults, you could, with one
command upgrade your whole cluster all at the same time.
It’s a powerful tool, and with that comes great responsibility.
The author of this document generally sets a single controlplane node to be the default node, which provides the most flexible default operation while limiting the scope of the disaster should a command be entered erroneously:
talosctl --talosconfig=./talosconfig \ config node 192.168.0.2
You may simply provide
--nodes to any
talosctl command to
supply the node or (comma-delimited) nodes on which you wish to perform the
Supplying the commandline parameter will override any default nodes
in the configuration file.
To verify default node(s) you’re currently configured to use, you can run:
$ talosctl version Client: ... Server: NODE: <node> ...
For a more in-depth discussion of Endpoints and Nodes, please see talosctl.
Default configuration file
You can reference which configuration file to use directly with the
talosctl --talosconfig=./talosconfig \ --nodes 192.168.0.2 version
talosctl comes with tooling to help you integrate and merge this
configuration into the default
talosctl configuration file.
This is done with the
talosctl config merge ./talosconfig
This will merge your new
talosconfig into the default configuration file
$XDG_CONFIG_HOME/talos/config.yaml), creating it if necessary.
Like Kubernetes, the
talosconfig configuration files has multiple “contexts”
which correspond to multiple clusters.
<cluster-name> you chose above will be used as the context name.
All of your machines are configured, and your
talosctl client is set up.
Now, you are ready to bootstrap your Kubernetes cluster.
If that sounds daunting, you haven’t used Talos before.
Bootstrapping your Kubernetes cluster with Talos is as simple as:
talosctl bootstrap --nodes 192.168.0.2
IMPORTANT: the bootstrap operation should only be called ONCE and only on a SINGLE controlplane node!
The IP can be any of your controlplanes (or the loadbalancer, if you have one). It should only be issued once.
At this point, Talos will form an
etcd cluster, generate all of the core
Kubernetes assets, and start the Kubernetes controlplane components.
After a few moments, you will be able to download your Kubernetes client configuration and get started:
Running this command will add (merge) you new cluster into you local Kubernetes
configuration in the same way as
talosctl config merge merged the Talos client
configuration into your local Talos client configuration file.
If you would prefer for the configuration to not be merged into your default Kubernetes configuration file, simple tell it a filename:
talosctl kubeconfig alternative-kubeconfig
If all goes well, you should now be able to connect to Kubernetes and see your nodes:
kubectl get nodes