Static addressing is comprised of specifying
routes ( remember to add your default gateway ), and
Most likely you’ll also want to define the
nameservers so you have properly functioning DNS.
machine: network: hostname: talos nameservers: - 10.0.0.1 interfaces: - interface: eth0 addresses: - 10.0.0.201/8 mtu: 8765 routes: - network: 0.0.0.0/0 gateway: 10.0.0.1 - interface: eth1 ignore: true time: servers: - time.cloudflare.com
Additional Addresses for an Interface
In some environments you may need to set additional addresses on an interface. In the following example, we set two additional addresses on the loopback interface.
machine: network: interfaces: - interface: lo addresses: - 192.168.0.21/24 - 10.2.2.2/24
The following example shows how to create a bonded interface.
machine: network: interfaces: - interface: bond0 dhcp: true bond: mode: 802.3ad lacpRate: fast xmitHashPolicy: layer3+4 miimon: 100 updelay: 200 downdelay: 200 interfaces: - eth0 - eth1
Setting Up a Bridge
The following example shows how to set up a bridge between two interfaces with an assigned static address.
machine: network: interfaces: - interface: br0 addresses: - 192.168.0.42/24 bridge: stp: enabled: true interfaces: - eth0 - eth1
To setup vlans on a specific device use an array of VLANs to add. The master device may be configured without addressing by setting dhcp to false.
machine: network: interfaces: - interface: eth0 dhcp: false vlans: - vlanId: 100 addresses: - "192.168.2.10/28" routes: - network: 0.0.0.0/0 gateway: 192.168.2.1