Talos network configuration subsystem is powered by COSI. Talos translates network configuration from multiple sources: machine configuration, cloud metadata, network automatic configuration (e.g. DHCP) into COSI resources.
Network configuration and network state can be inspected using
talosctl get command.
Network machine configuration can be modified using
talosctl edit mc command (also variants
talosctl patch mc,
talosctl apply-config) without a reboot.
As API access requires network connection,
can be used to test the configuration with automatic rollback to avoid losing network access to the node.
There are six basic network configuration items in Talos:
Address(IP address assigned to the interface/link);
Route(route to a destination);
Link(network interface/link configuration);
Resolver(list of DNS servers);
Hostname(node hostname and domainname);
TimeServer(list of NTP servers).
Each network configuration item has two counterparts:
LinkStatus) describes the current state of the system (Linux kernel state);
LinkSpec) defines the desired configuration.
Status resources have aliases with the
Status suffix removed, so for example
AddressStatus is also available as
Talos networking controllers reconcile the state so that
*Status equals the desired
The current network configuration state can be observed by querying
*Status resources via
$ talosctl get addresses NODE NAMESPACE TYPE ID VERSION ADDRESS LINK 172.20.0.2 network AddressStatus eth0/172.20.0.2/24 1 172.20.0.2/24 eth0 172.20.0.2 network AddressStatus eth0/fe80::9804:17ff:fe9d:3058/64 2 fe80::9804:17ff:fe9d:3058/64 eth0 172.20.0.2 network AddressStatus flannel.1/10.244.4.0/32 1 10.244.4.0/32 flannel.1 172.20.0.2 network AddressStatus flannel.1/fe80::10b5:44ff:fe62:6fb8/64 2 fe80::10b5:44ff:fe62:6fb8/64 flannel.1 172.20.0.2 network AddressStatus lo/127.0.0.1/8 1 127.0.0.1/8 lo 172.20.0.2 network AddressStatus lo/::1/128 1 ::1/128 lo
In the output there are addresses set up by Talos (e.g.
addresses set up by other facilities (e.g.
flannel.1/10.244.4.0/32 set up by CNI).
Talos networking controllers watch the kernel state and update resources accordingly.
Additional details about the address can be accessed via the YAML output:
# talosctl get address eth0/172.20.0.2/24 -o yaml node: 172.20.0.2 metadata: namespace: network type: AddressStatuses.net.talos.dev id: eth0/172.20.0.2/24 version: 1 owner: network.AddressStatusController phase: running created: 2021-06-29T20:23:18Z updated: 2021-06-29T20:23:18Z spec: address: 172.20.0.2/24 local: 172.20.0.2 broadcast: 172.20.0.255 linkIndex: 4 linkName: eth0 family: inet4 scope: global flags: permanent
Resources can be watched for changes with the
--watch flag to see how configuration changes over time.
Other networking status resources can be inspected with
talosctl get routes,
talosctl get links, etc.
$ talosctl get resolvers NODE NAMESPACE TYPE ID VERSION RESOLVERS 172.20.0.2 network ResolverStatus resolvers 2 ["220.127.116.11","18.104.22.168"]
# talosctl get links -o yaml node: 172.20.0.2 metadata: namespace: network type: LinkStatuses.net.talos.dev id: eth0 version: 2 owner: network.LinkStatusController phase: running created: 2021-06-29T20:23:18Z updated: 2021-06-29T20:23:18Z spec: index: 4 type: ether linkIndex: 0 flags: UP,BROADCAST,RUNNING,MULTICAST,LOWER_UP hardwareAddr: 4e:95:8e:8f:e4:47 broadcastAddr: ff:ff:ff:ff:ff:ff mtu: 1500 queueDisc: pfifo_fast operationalState: up kind: "" slaveKind: "" driver: virtio_net linkState: true speedMbit: 4294967295 port: Other duplex: Unknown
The desired networking configuration is combined from multiple sources and presented
$ talosctl get addressspecs NODE NAMESPACE TYPE ID VERSION 172.20.0.2 network AddressSpec eth0/172.20.0.2/24 2 172.20.0.2 network AddressSpec lo/127.0.0.1/8 2 172.20.0.2 network AddressSpec lo/::1/128 2
AddressSpecs are applied to the Linux kernel to reach the desired state.
If, for example, an
AddressSpec is removed, the address is removed from the Linux network interface as well.
*Spec resources can’t be manipulated directly, they are generated automatically by Talos
from multiple configuration sources (see a section below for details).
*Spec resource is queried in YAML format, some additional information is available:
# talosctl get addressspecs eth0/172.20.0.2/24 -o yaml node: 172.20.0.2 metadata: namespace: network type: AddressSpecs.net.talos.dev id: eth0/172.20.0.2/24 version: 2 owner: network.AddressMergeController phase: running created: 2021-06-29T20:23:18Z updated: 2021-06-29T20:23:18Z finalizers: - network.AddressSpecController spec: address: 172.20.0.2/24 linkName: eth0 family: inet4 scope: global flags: permanent layer: operator
An important field is the
layer field, which describes a configuration layer this spec is coming from: in this case, it’s generated by a network operator (see below) and is set by the DHCPv4 operator.
Spec resources described in the previous section show the final merged configuration state,
while initial specs are put to a different unmerged namespace
Spec resources in the
network-config namespace are merged with conflict resolution to produce the final merged representation in the
HostnameSpec as an example.
The final merged representation is:
# talosctl get hostnamespec -o yaml node: 172.20.0.2 metadata: namespace: network type: HostnameSpecs.net.talos.dev id: hostname version: 2 owner: network.HostnameMergeController phase: running created: 2021-06-29T20:23:18Z updated: 2021-06-29T20:23:18Z finalizers: - network.HostnameSpecController spec: hostname: talos-default-controlplane-1 domainname: "" layer: operator
We can see that the final configuration for the hostname is
And this is the hostname that was actually applied.
This can be verified by querying a
$ talosctl get hostnamestatus NODE NAMESPACE TYPE ID VERSION HOSTNAME DOMAINNAME 172.20.0.2 network HostnameStatus hostname 1 talos-default-controlplane-1
Initial configuration for the hostname in the
network-config namespace is:
# talosctl get hostnamespec -o yaml --namespace network-config node: 172.20.0.2 metadata: namespace: network-config type: HostnameSpecs.net.talos.dev id: default/hostname version: 2 owner: network.HostnameConfigController phase: running created: 2021-06-29T20:23:18Z updated: 2021-06-29T20:23:18Z spec: hostname: talos-172-20-0-2 domainname: "" layer: default --- node: 172.20.0.2 metadata: namespace: network-config type: HostnameSpecs.net.talos.dev id: dhcp4/eth0/hostname version: 1 owner: network.OperatorSpecController phase: running created: 2021-06-29T20:23:18Z updated: 2021-06-29T20:23:18Z spec: hostname: talos-default-controlplane-1 domainname: "" layer: operator
We can see that there are two specs for the hostname:
- one from the
defaultconfiguration layer which defines the hostname as
talos-172-20-0-2(default driven by the default node address);
- another one from the layer
operatorthat defines the hostname as
Talos merges these two specs into a final
HostnameSpec based on the configuration layer and merge rules.
Here is the order of precedence from low to high:
default(defaults provided by Talos);
cmdline(from the kernel command line);
platform(driven by the cloud provider);
operator(various dynamic configuration options: DHCP, Virtual IP, etc);
configuration(derived from the machine configuration).
So in our example the
HostnameSpec overrides the
default layer producing the final hostname
The merge process applies to all six core networking specs.
For each spec, the
layer controls the merge behavior
If multiple configuration specs
appear at the same layer, they can be merged together if possible, otherwise merge result
is stable but not defined (e.g. if DHCP on multiple interfaces provides two different hostnames for the node).
LinkSpecs are merged across layers, so for example, machine configuration for the interface MTU overrides an MTU set by the DHCP server.
Network operators provide dynamic network configuration which can change over time as the node is running:
- Virtual IP
Network operators produce specs for addresses, routes, links, etc., which are then merged and applied according to the rules described above.
Operators are configured with
OperatorSpec resources which describe when operators
should run and additional configuration for the operator:
# talosctl get operatorspecs -o yaml node: 172.20.0.2 metadata: namespace: network type: OperatorSpecs.net.talos.dev id: dhcp4/eth0 version: 1 owner: network.OperatorConfigController phase: running created: 2021-06-29T20:23:18Z updated: 2021-06-29T20:23:18Z spec: operator: dhcp4 linkName: eth0 requireUp: true dhcp4: routeMetric: 1024
OperatorSpec resources are generated by Talos based on machine configuration mostly.
DHCP4 operator is created automatically for all physical network links which are not configured explicitly via the kernel command line or the machine configuration.
This also means that on the first boot, without a machine configuration, a DHCP request is made on all physical network interfaces by default.
Specs generated by operators are prefixed with the operator ID (
dhcp4/eth0 in the example above) in the unmerged
$ talosctl -n 172.20.0.2 get addressspecs --namespace network-config NODE NAMESPACE TYPE ID VERSION 172.20.0.2 network-config AddressSpec dhcp4/eth0/eth0/172.20.0.2/24 1
Other Network Resources
There are some additional resources describing the network subsystem state.
NodeAddress resource presents node addresses excluding link-local and loopback addresses:
$ talosctl get nodeaddresses NODE NAMESPACE TYPE ID VERSION ADDRESSES 10.100.2.23 network NodeAddress accumulative 6 ["10.100.2.23","22.214.171.124","126.96.36.199","192.168.95.64","2604:1380:1:ca00::17"] 10.100.2.23 network NodeAddress current 5 ["10.100.2.23","188.8.131.52","192.168.95.64","2604:1380:1:ca00::17"] 10.100.2.23 network NodeAddress default 1 ["10.100.2.23"]
defaultis the node default address;
currentis the set of addresses a node currently has;
accumulativeis the set of addresses a node had over time (it might include virtual IPs which are not owned by the node at the moment).
NodeAddress resources are used to pick up the default address for
etcd peer URL, to populate SANs field in the generated certificates, etc.
Another important resource is
Nodename which provides
Node name in Kubernetes:
$ talosctl get nodename NODE NAMESPACE TYPE ID VERSION NODENAME 10.100.2.23 controlplane Nodename nodename 1 infra-green-cp-mmf7v
Depending on the machine configuration
nodename might be just a hostname or the FQDN of the node.
NetworkStatus aggregates the current state of the network configuration:
# talosctl get networkstatus -o yaml node: 10.100.2.23 metadata: namespace: network type: NetworkStatuses.net.talos.dev id: status version: 5 owner: network.StatusController phase: running created: 2021-06-24T18:56:00Z updated: 2021-06-24T18:56:02Z spec: addressReady: true connectivityReady: true hostnameReady: true etcFilesReady: true
For each of the six basic resource types, there are several controllers:
*Statusresources observing the Linux kernel state.
*ConfigControllerproduces the initial unmerged
*Specresources in the
network-confignamespace based on defaults, kernel command line, and machine configuration.
*Specresources into the final representation in the
*Specresources to the kernel state.
For the network operators:
OperatorSpecresources based on machine configuration and deafauls.
OperatorSpecControllerruns network operators watching
OperatorSpecresources and producing various
*Specresources in the
There are several configuration sources for the network configuration, which are described in this section.
lointerface is assigned addresses
- hostname is set to the
IPis the default node address;
- resolvers are set to
- time servers are set to
- DHCP4 operator is run on any physical interface which is not configured explicitly.
The kernel command line is parsed for the following options:
ip=option is parsed for node IP, default gateway, hostname, DNS servers, NTP servers;
bond=option is parsed for bonding interfaces and their options;
talos.hostname=option is used to set node hostname;
talos.network.interface.ignore=can be used to make Talos skip network interface configuration completely.
Platform configuration delivers cloud environment-specific options (e.g. the hostname).
Platform configuration is specific to the environment metadata: for example, on Equinix Metal, Talos automatically configures public and private IPs, routing, link bonding, hostname.
Platform configuration is cached across reboots in
Network operators provide configuration for all basic resource types.
The machine configuration is parsed for link configuration, addresses, routes, hostname,
resolvers and time servers.
Any changes to
.machine.network configuration can be applied in immediate mode.
Network Configuration Debugging
Most of the network controller operations and failures are logged to the kernel console,
additional logs with
debug level are available with
talosctl logs controller-runtime command.
If the network configuration can’t be established and the API is not available,
logs can be sent to the console with
debug: true option in the machine configuration.